Kenver Equipment Ltd.  

 

 

Home
Up
Newsletter
Parts
Service
Used equipment
New Arrivals
Job Openings
Staff

 

 

 

 

Post Pounder

High & Heavy Hitter
Wheat Heart Pound Bigger Posts Faster

(Model HH64)
 

bulletOur most popular model for all heavy and light duty post placement
 
bullet660 lb heavy duty hammer pounds posts in hard ground
 
bullet4 head mounting positions
 
bullet64" stroke
 
bulletConvenient post rack, standard
 
bulletPTO pump or 9 HP Honda motor
 
bulletPTO requires 75 HP tractor

 

HH-Pounder-short

Ezee On 1400 POST DRIVER

FEATURES

bullet.gif (53 bytes)P.T.O. Drive
bullet.gif (53 bytes)Full Hydraulic Controls
bullet.gif (53 bytes)Standard Lift (9'4") or with Optional Mast Extension (11')
bullet.gif (53 bytes)5' Hammer Stroke
bullet.gif (53 bytes)9" x14" Hammer Face
bullet.gif (53 bytes)Hammer Ballast Box with Lid
bullet.gif (53 bytes)310 lb. Hammer Weight (Empty) (*)
bullet.gif (53 bytes)0" - 16" In and Out Hammer Slide

* * Ballasting of 1400 hammer is Not recommended.



 

Ezee On 2400 POST DRIVER

FEATURES

bullet.gif (53 bytes)P.T.O. or Engine Drive
bullet.gif (53 bytes)Full Hydraulic Controls
bullet.gif (53 bytes)Standard Lift (9'4") or with Optional Mast Extension (11')
bullet.gif (53 bytes)5' Hammer Stroke
bullet.gif (53 bytes)9" x14" Hammer Face
bullet.gif (53 bytes)Hammer Ballast Box with Lid
bullet.gif (53 bytes)310 lb. Hammer Weight (Empty) - 100,000 lb. Impact (*)
bullet.gif (53 bytes)700 lb. Hammer Weight (with Ballast)
bullet.gif (53 bytes)0" - 16" In and Out Hammer Slide
bullet.gif (53 bytes)O" - 18" Extendable Hitch (Optional)
bullet.gif (53 bytes)Ball Hitch Receiver (Optional)
bullet.gif (53 bytes)Welded Frame, Axle and Counter Weight Box Reduces

         Set Up Time
bullet.gif (53 bytes)15" Wheels (670 x 15 Tires Optional)
bullet.gif (53 bytes)Post Rack (Optional)
bullet.gif (53 bytes)Stand to Prevent Backward Flip Over


* Impact lbs. are based on an 8" diameter post driven into

* packed clay soil. Impact increases proportionally with ballast in* hammer. Ballasting of 1400 hammer is Not recommended.



 

 

 

                       

Send mail to
jruecker@kenverequipment.com  with questions or comments about this web site.
Last modified: 03/22/05